Close

Shop

Toyota Tundra Classic Rear Bumper | 2022-2023

 

Add some protection to the rear end of your Tundra with the CBI Offroad Classic Rear Bumper. Check out the key features below.

  • Wrap-around protection
  • integrated recovery points
  • Built-in pocket step on side of bumper
  • Solid 7 gauge steel construction
  • Retain factory blind-spot monitors and proximity sensors*
  • Cutouts for additional flush mount reverse lights (BAJA DESIGNS S2 PATTERN, RIGID SR-M )

*Blind spot monitors may require professional calibration

Read More

Toyota Tundra Adventure Front Bumper | 2022-2023

The CBI Offroad Fab Adventure Front Bumper is designed for those who are always pushing their truck to the limit. Check out what sets this bumper apart in our key features below. 

  • Integrated winch mount (Fits up to a 12,000lb winch)
  • The Winch tray is constructed with ¼ steel 
    • Built-in, rugged recovery points 
    • Includes mounting points for a 30” single-row light bar
    • Each wing includes mounting points for a single or dual light pod setup
    • Follows factory lines
    • Two-piece design for easy install
    • Compatible with cruise control sensor

***Vehicles equipped with Active Front Spoiler require the FRONT ACTIVE SPOILER DELETE MODULE

  • Requires trimming
Read More

Scratch & Dent Toyota Tundra Prinsu Crewmax Cab Rack | 2007-2021

Toyota Tundra Prinsu Crewmax Cab Rack | 2007-2020

2nd Gen Toyota Tundra CrewMax Cab Rack
Choice of Standard Wind Deflector Style, Cutout for 40″” Light Bars, or Cutout for 50″” Light Bars
07-21 Tundra
Powder Coat is a Satin Black Textured Finish
2nd Gen Toyota Tundra
Noise reducing edge trim is included with the purchase of the rack

Scratch and Dent Roof Rack.

You will receive new side panels and a new wind deflector with scratch and dent crossbars. All damage is cosmetic and will not affect the functionality of the product.

Read More

Toyota Sequoia Prinsu Roof Rack | 2023

● Two piece design
● No drilling required
● Attaches to factory mounting in the middle and rear of the vehicle and via 3M VHB tape in the front.
● Powder coated black
● All Aluminum construction
● Lightweight
● Large platform area
● Modular

Read More

Toyota Sequoia Covert Bumper | 2023

  •  2 piece design for easy installation
  • Retains factory sensors 
  • Bolt on push bar (sold separately)
  • Built-in, rugged recovery points
  • Includes mounting points for a 20” single row light bar
  • Winch tray is constructed with ¼ steel
  • Integrated winch mount (Fits up to a 12,000lb winch)
Read More

Toyota Sequoia Classic Rear Bumper | 2023

    • WRAP AROUND PROTECTION 
    •  INTEGRATED RECOVERY POINTS 
    •  SOLID 7GA STEEL CONSTRUCTION 
    •  INTEGRATED HITCH RECEIVER COVER 
    •  RETAIN FACTORY BLIND SPOT MONITORS AND PROXIMITY SENSORS*
    • CUT OUTS FOR ADDITIONAL FLUSH FIT REVERSE LIGHTS (BAJA DESIGNS S2 PATTERN, RIGID SR-M )

    *BLIND SPOT MONITORS MAY REQUIRE PROFESSIONAL CALIBRATION

    ***Swing arm options coming soon***

Read More

Toyota Tundra Double Cab Roof Rack | 2022-2023

  • ● Sleek design
    ● Light weight
    ● Aerodynamic and quiet
    ● Modular
    ● Powder coated black aluminum side rails and wind deflector
    ● High strength anodized aluminum extrusion crossbars with integrated drop points
    ● Wind deflector compatible with 40” light bar available
    ● Drilling required
    ● Noise reducing edge trim is included with the roof rack purchase
Read More

Toyota Sequoia Prinsu Roof Rack | 2001-2007

  • Sleek
  • Low profile
  • Easy Installation
  • No drilling required
  • Attaches to factory mounting points
  • High-strength aluminum crossbars with drop points
  • Lightweight
  • Large usable platform area
  • 40’’ Lightbar cutout wind deflector available
  • CLEARANCE TO ROOF HEIGHT ADDED USABLE PLATFORM AREA 1.2’’ 2.5’’ 97.5’’ x 48.5’’
    Install guide coming soon
Read More

Toyota Tundra Swing Arm Rear Bumper | 2014-2021

  • Same great bumper taste now with swing arms! 
  • Provides protection and additional recovery points 
  • Follows factory lines for a perfect fit
  • Clears factory receiver hitch 
  • Compatible with factory parking sensors and bsm monitors* ( BSM sensory may require professional realignment after installation)  
  • Steel body construction with aluminum traction plates
  • Cut-outs for additional flush fit lights (BAJA DESIGNS S2 PATTERN, RIGID SR-M )
  • Swing arms are completely removable 
  • Swing arms are constructed from formed 10GA Steel for optimal weight/strength
Read More

3rd Gen Toyota Tundra Full Overland Skid Plate | 2022-2023

Keep the underside of your Tundra safe with our full Skid Plate Package. Check out some of the key features below.

  • Steel construction for maximum protection and durability
  • Coverage all the way to your transfer case
  • Features cut-outs for convenient access to the oil drain plug and oil filter
  • Can be powder coated or ordered in bare metal
  • Fully bolt-on installation, no modification to truck required
  • Integrated drain ports to allow for draining and easy maintenance
Read More

3rd Gen Toyota Tundra Baja Front Bumper | 2022+

Requires trimming
Integrated winch mount (Fits up to a 12,000lb winch)
Winch tray is constructed with ¼ steel
Built-in, rugged recovery points
Includes mounting points for a 30” single row light bar
Each wing includes mounting points for a single or dual light pod set up
Follows factory lines
Two-piece design for easy install
Compatible with cruise control sensor

Read More

Product Lead Times